Toshiba B-450-HS-QQ owner manual Strip type

Batch type:

8. LOADING THE PAPER

EO1-330019

8. LOADING THE PAPER

13.Close the top cover, and then attach the supply cover to the supply holder unit. (Refer to section 6.2 INSTALLING THE SUPPLY COVER.) Paper loading is now complete.

Top Cover

Fig. 8-9

Cutter type: Where a cutter is fitted load the paper as standard and feed it through the cutter module.

NOTE: When using the cutter, be sure to cut the backing paper between the labels. Cutting on the label will cause the glue to stick to the cutter, which may affect the cutter quality and shorten it's life.

Cutter Module

Paper Outlet

Paper

Fig. 8-10

Strip type:

1Strip the labels from the backing paper for about 200-mm from the top edge of the label roll.

2First push the strip lever toward the printer to release the hook, and then pull the strip lever.

3Pass the backing paper between the strip roller and the strip guide roller. After taking up any slack on the paper, set the strip lever in position.

Strip Lever

Strip Guide Roller

Backing Paper Fig. 8-11

8-4