Toshiba C-DR0101 instruction manual Block Search Operation

12.2.3. Block Search Operation

•Using the ( ) or ( ) key, move the cursor to scroll the screen and select the desired block.

The ( ) indication is displayed when data exists before the currently displayed search screen, while the ( ) indication is displayed when data exists after the currently-displayed search screen.

1[Recorded block types]

Recorded block types are classified by characters "N," "T," and "A."

Item	Contents
N	General Recording block
T	Internal Timer Recording block
A	Alarm Recording block

	BLOCK SEARCH
		N	JAN / 01 / 04		21	: 35 : 27
		AMJAN / 01 / 04			21	: 35 : 27
		– – – – – / – – / ––			–– : –– : ––
		– – – – – / – – / ––			–– : –– : ––
		– – – – – / – – / ––			–– : –– : ––
		– – – – – / – – / ––			–– : –– : ––
		– – – – – / – – / ––			–– : –– : ––
		– – – – – / – – / ––			–– : –– : ––
		– – – – – / – – / ––			–– : –– : ––
		– – – – – / – – / ––			–– : –– : ––
		– – – – – / – – / ––			–– : –– : ––
		– – – – – / – – / ––			–– : –– : ––
		– – – – – / – – / ––			–– : –– : ––
		– – – – – / – – / ––			–– : –– : ––
1				2		3

Note

The Alarm Recording block time represents the time that an alarm was received. If the Pre-alarm function has been set, Alarm Recording begins from the image recorded before the indicated alarm time.

2[Recorded block attribute]

Character M represents data attribute types.

Item	Contents
No Indication	Normal Recordung data
M	Mirroring Recording data

Note

Avoid mixing both Normal Recordings and Mirroring Recordings on the hard disk. If mixed, block shift or search operations cannot be correctly performed during playback. (Refer to p. 15; "Disk Settings.")

3[Hard disk types]

Characters A and B represent built-in hard disk drives.

Item Contents

AData contained in Hard Disk A

BData contained in Hard Disk B

•Executing searches with the Select key displays the first image of the block on the still picture screen. The image is played back if the Pause key is pressed. Pressing the (+) or (–) key while in the Pause mode displays the first image of the block, performing playback from one block to another. After the block has switched over to another block, playback can be performed even without pressing the Pause key.

•"Loop" playback is performed for all playback operations after Block Shift search.

Note

•"Loop" playback: Repeats playback of each recorded block.

•Pressing the Playback Stop key ( ) and the Playback key ( ) again during "Loop" playback resets the "Loop" playback, causing playback to be performed on a time basis.

Press

-

Head of the selected block

Press

+

Block

Block

Block

“Loop” playback “Loop” playback “Loop” playback

38