Toshiba C-DR0101 13. CONNECTIONS

40

13. CONNECTIONS

13.1. Preparations for Connections

Switch off the power to the Digital Video Recorder and all connected equipment before performing

connections. The Digital Video Recorder has built-in hard disks. To avoid damage to them, when moving the

Digital Video Recorder, be sure to leave the Recorder’s Main Power switch turned off for at least 30 seconds

before moving.

13.1.1. Control Input/Output Terminal Connections

Applicable cables are as follows:

• Solid cable : AWG28 (ø 0.32mm) – AWG22(ø 0.65mm)

• Twisted cable: AWG28 (0.08mm2) – AWG22(0.32mm2)

To connect, remove the cable sheath 10 mm from the cable end, and then insert the cable into the terminal

pressing on the tab on the terminal using a screwdriver.

13.2. When Using the 24V AC or 12V DC or AC Mains Camera:

Connect the Digital Video Recorder’s Video Input terminal to the camera’s video output terminal.

13.3. Connections to the Monitor TV

The Digital Video Recorder’s terminals to be connected to the monitor differ depending on the type of

connected equipment.

• When the Digital Video Recorder is not connected to the Multi-switcher:

Connect the Recorder’s Video Output terminal to the monitor’s video input terminal, and the Recorder’s

Audio Output terminal to the monitor’s audio input terminal.

• When the Digital Video Recorder is connected to the Multi-switcher:

Connect the Recorder’s Switcher Video Output terminal to the monitor’s video input terminal, and the

Recorder’s Audio Output terminal to the monitor’s audio input terminal.

Contents

Main 1CH DIGITAL VIDEO RECORDER (NTSC SYSTEM ) C-DR0100 C-DR0101 C-DR0105 INSTRUCTION MANUAL TABLE OF CONTENTS Page 14. CONNECTION EXAMPLES 15. RECORDING TIME TABLE WHEN YOU NEED HELP 16. EXTERNAL TERMINAL SPECIFICATIONS 17. RACK MOUNTING 18. IF YOU THINK THERE IS A FAILURE: (TROUBLESHOOTING) 19. SPECIFICATIONS WARNING CAUTION 3. FEATURES CAUTION 2. GENERAL DESCRIPTION 4. HANDLING PRECAUTIONS 12 3 4 5 6 7 8 91011 12 13 1415 16 5. NOMENCLATURE AND FUNCTIONS Page 21 22 23 24 25 26 27 28 18 19 17 20 2. Enter the setting screen. + 6. SETTING ITEM CHART AND SETTING PROCEDURES 6.1. Basic Setting Procedures The shaded item in the figure refers to the cursor position. 1. Enter the main menu screen. 6.2. Setting Item Chart 7.2. Playback Settings 7. INDIVIDUAL ITEM SETTINGS 7.1. Main Menu Screen 7.3. Clock Settings 7.4. Disk Settings 7.5. Recording Settings Page * The underlined contents are factory-preset values. with the () or (+) key. the table below. Timer Schedule Screen Settings with the () or (+) key. the table below. * The underlined contents are factory-preset values. Page 7.6. Screen Display Settings * The underlined contents are factory-preset values. the table below. with the () or (+) key. 7.7.1 Key Lock Release 7.7. Key Lock 7.8. Communication Settings 7.9. Log Display 7.10. System Maintenance Page 8. DIGITAL VIDEO RECORDER ACTIVATION AND TERMINATION 8.1. Recorder's Activation 8.2. When the Failure Screen Is Displayed: 8.3. Recorders Termination 9. OPERATION AFTER POWER FAILURE RESTORATION 9.1. When the Power Fails during Recording; 10. RECORDING 10.1. Type of Recording ** Page 10.5. Performing Internal Timer Recording 10.4. Performing General Recording 10.3. The Keys to Be Used in Recording 10.6. Performing Alarm Recording 11. PLAYBACK 11.1. Type of Playback 1 2 3 4 5 6 78 11.4. Performing Playback 11.5. Performing Various Playback Fanctions 11.3. The Keys to Be Used in Playback Page 11.6. About the Playback Start Position 12. SEARCH FUNCTIONS 12.2. Date/Time and Block Searches 12.1. The Keys to Be Used in Searching - 12.3. Time Shift Search 13. CONNECTIONS 13.1. Preparations for Connections 13.2. When Using the 24V AC or 12V DC or AC Mains Camera: 13.3. Connections to the Monitor TV 13.4. VIDEO OUT GND Video Input Video Output Video Input 1CH Digital Video Recorder 14. CONNECTION EXAMPLES 14.1. Connection to the 24V AC or 12V DC or AC Mains Camera. 1 9 GND 14.2. Connection to the Multi-switcher 14.2.1. Basic System (Combined with the C-MS91D Multi-switcher) Multi-switcher (C-MS91D) 1 Master 14.2.2. Expansion System (Combined with the C-MS91D Multi-switcher) 15.2. When using the C-DR0100 15. RECORDING TIME TABLE 15.3. When using the C-DR0101 15.1. Recording Picture Quality Setting 15.4. When using the C-DR0105 16. EXTERNAL TERMINAL SPECIFICATIONS 16.1. RS-232C Communication Specifications 16.1.4. RS-232C Communication Format (Controller Digital Recorder) Menu Setting Commands Note: Date/Time search is performed using setting data. Menu Setting Content Request Command Search Menu Execution Command Log Request Command Page Menu Setting Content Response Command Log Content Response Command Shown below are log information DATA section (13 bytes) formats. Search menu result command 16.2. About the Ethernet Terminal 17. RACK MOUNTING 18. IF YOU THINK THERE IS A FAILURE: (TROUBLESHOOTING) Symptom Remedy Possible Cause * 0dB = 1V 19. SPECIFICATIONS