English

Controls and input connections

A wide variety of external equipment can be connected to the input sockets on the side of the television.

Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions.

RED LED – Standby GREEN LED – Power on (LED1)

GREEN LED – On timer (LED 2)

☛

Input 3

 

(side) will take

priority over

EXT3

(back) if

both

connections

are

 

 

used at the

same time.

Standby

INPUT 3 (EXT3)

Switching on

If the RED LED is unlit check that the mains plug is connected to the power supply. If the picture does not appear press ion the remote control, it may take a few moments.

To put the television into Standby press ion the remote control. To view the television press iagain. The picture may take a few seconds to appear.

To set up the television you will now need to use the on-screen menus. Press the MENU button on the remote control to see the menus.

The menu bar at the top of the screens will show five different topics shown in symbols. As each symbol is selected by pressing zor xon the navigation ring on the remote control, its respective options will appear below.

To use the options, press eon the navigation ring to move down through them and OK, zor xto select the required choice. Follow the on-screen instructions. The functions of each menu are described in detail throughout the manual.

Using the controls and connections

To alter the volume press – j+.

To alter the programme position press eFf.

Press MENU and S, R, P or Q to control the sound and picture options.

Press MENU to finish.

When connecting sound equipment to EXT3, connect the audio output of the equipmentto thephono sockets on the television.

To select the Input, press Buntil the display shows EXT3 as described on page 27. The television will automatically sense the type of signal.

Please always refer to the owner’s manual of the equipment to be connected for full details.

Please note: Inserting the headphone plug will mute the sound from all speakers.

10