English

REGZA-LINK controls

This feature uses CEC (Central Electronic Control) technology and allows the control of Toshiba REGZA-LINK compatible equipment from the television remote control. Note: not all Toshiba products currently support REGZA-LINK.

REGZA-LINK equipment control

REGZA-LINK mode on the televisions remote control allows the control of connected REGZA-LINK equipment being watched.

To control the REGZA-LINK input source first select the equipment with REGZA-LINK input source selection, then switch the mode on the remote control to REGZA-LINK and press any buttons.

The available functions depend on the equipment connected. Not all the remote control keys may be available. Please refer to the operation manual for each piece of equipment connected.

The television features that can be controlled by the connected equipment are: Standby, Volume, Channel, Sound mute, Display information, Number buttons and Previous programme.

REGZA-LINK input source selection

When any equipment using CEC technology is connected the REGZA-LINK icon will show in the input source list allowing selection of individual devices.

1Press Band a list will appear on screen showing modes and all stored external equipment.

2Use for eto highlight an input source, then press OK to select.

1BBC1

HDMI2 REGZA-LINK

HDMI1

B3C

B2 DVD

B1

4 CH4

3ITV

2BBC2

NOTE: When the television is switched on it will take a few minutes for the REGZA-LINK logo to appear in the list, when an HDMI cable is removed it will take a few minutes for the logo to disappear.

NOTE: If the HDMI cable from connected equipment is changed or HDMI equipment setting are changed Enable REGZA-LINKin the REGZA-LINK setup menu may need to be reset to On.

The following features are dependent on the connected equipment. For operating information refer to the operation manual for all connected equipment.

24