Connecting external equipment

Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket.

COMPONENT VIDEO (EXT3)

SCART 2 (EXT2)

SCART 1 (EXT1)

CABLE HOLDER

English

☛

*

 

 

could

 

 

a decoder

 

 

 

 

be Digital

Satellite

 

 

 

or any other

 

.

 

FIXING STRAP

compatible

decoder

 

 

 

 

 

 

 

 

 

decoder*

 

MEDIA REC.

 

 

 

 

 

 

TV

HDMI™ INPUT

 

 

 

 

 

 

 

 

media recorder

 

SOCKETS

 

IN/OUT

SAT

 

 

 

 

 

 

☛

The

 

 

 

 

cable holder

can be

 

 

used for

aerial,

media

 

recorder and

audio

 

 

cables. Do not

use

 

 

as a handle and

remove all

 

 

cables

 

before moving the

television.

 

Aerial cables:

Connect the aerial to the socket on the rear of the television. If you use a decoder* and/or a media recorder it is essential that the aerial cable is connected through the decoder and/or through the media recorder to the television.

SCART leads:

Connect the video recorder IN/OUT socket to the television. Connect the decoder TV socket to the television. Connect the media recorder SAT socket to the decoder MEDIA REC. socket.

Before running Auto tuning put your decoder and media recorder to Standby.

The phono sockets alongside the COMPONENT VIDEO INPUT sockets will accept L and R audio signals.

In addition there is a fixed external audio ouput which enables the connection of a suitable Hi-Fi unit.

HDMI™ (High-Definition Multimedia Interface) is for use with a DVD, decoder or electrical equipment with digital audio and video output.

REGZA-LINK will only work through HDMI when using other Toshiba equipment with REGZA-LINK capability.

NOTE: It is recommended that an HDMI cable with the

HDMI logo () is used. When connecting other equipment to this television if the connection is capable of 1080p a Category 2 cable will be required. Conventional HDMI/DVI cable may not work properly with this mode. It is recommended that DVI cable or DVI/HDMI adapter with cable is less than 2m long.

NOTE: Although this television is able to connect to HDMI equipment it is possible that some equipment may not operate correctly.

A wide variety of external equipment can be connected to the back of the television, therefore the relevant owners manuals for all additional equipment must be referred to.

We recommend SCART 1 for a decoder and SCART 2 for a media recorder. If connecting S-VIDEO equipment, set the INPUT for EXT2. See page 27.

If the television automatically switches over to monitor external equipment, return to normal television by pressing the desired programme position button. To recall external equipment, press Bto select between TV, EXT1, EXT2, EXT3C, HDMI1, HDMI2 or PC.

HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC.

7