Toshiba C300 Input selection, INPUT signal selection

Input selection and

AV connections

Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page 7 for a clear view of the back connection recommendations.

English

Most media recorders and decoders send a signal through the SCART lead to switch the television to the correct Input socket.

Alternatively press the external source selection button Buntil the picture from connected equipment is shown.

This button must be used to view equipment connected using the COMPONENT VIDEO INPUT (EXT3C).

An S in the display e.g. B2S (EXT 2S), indicates the input is set for an S-Video signal.

Input selection

Use the Input Selection if the television does not switch

over automatically.

1At any time by pressing Ba list will appear on screen showing all stored programmes and external equipment. Use fand eto highlight and OK to select.

1BBC1

HDMI2

HDMI1 B3C

B2 DVD

B1

4 CH4

3ITV

2BBC2

HDMI™ displays equipment connected to Input HDMI on the back of the television.

PC displays a computer connected to Input

RGB/PC on the back of the television.

INPUT signal selection

This specifies the type of signal going into SCART 2 (EXT2)

on the back of the television. Please refer to the

manufacturers instructions for the connected equipment.

1In the SET UP menu press euntil

AV connection is highlighted, then press OK.

	SET UP	1/2
Language		English
Country		UK
Auto tuning		OK
Manual tuning		OK
AV connection		OK
Picture position		OK
MENU Back	EXIT Watch TV

2With zor xselect either AV or S-VIDEOas the required input for EXT2.

	AV connection
PC/HDMI1 audio		PC
HDMI1 audio		Digital
Lip Sync
EXT2 input		AV
Woofer		Internal
MENU Back	EXIT Watch TV

If the colour is missing try the alternative setting.

27