English

Input selection and AV connections continued

PC audio

In order to receive sound from a connected PC, plug the audio cable into the back of the television (as shown in ‘Connecting a computer’ section), then use the PC/HDMI1 audio settings.

1In the SET UP menu press euntil

AV connection is highlighted, then press OK.

 

 

 

 

 

 

SET UP

1/2

Language

 

 

English

 

Country

 

 

UK

 

Auto tuning

 

 

OK

Manual tuning

 

 

OK

AV connection

 

 

OK

Picture position

 

 

OK

 

 

 

 

 

MENU Back

EXIT Watch TV

 

 

2Highlight PC/HDMI1 audio then use xto select the PC option.

 

AV connection

 

 

 

 

PC/HDMI1 audio

 

PC

 

 

 

 

 

HDMI1 audio

 

Digital

 

Lip Sync

 

 

 

EXT2 input

 

AV

 

Woofer

 

Internal

 

 

 

 

 

MENU Back

EXIT Watch TV

NOTE: Selecting the PC option will force HDMI into digital audio.

EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwith digital content protection, which is being standardized for reception of high-definition video signals. Because this is an evolving technology, it is possible that some devices may not operate properly with the TV.

HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC.

HDMI1audio

If the connected HDMI source does not support digital audio, plug the audio cable into PC/HDMI1 audio on the back of the television (as shown in the ‘Connecting a computer’ section), then use the HDMI1 audio settings.

1In the AV connection menu press eto highlight PC/HDMI1 audio and using xselect HDMI1.

2Then highlight HDMI1 audio and using zor x select Auto., Digital or Analogue.

 

AV connection

 

 

 

 

PC/HDMI1 audio

 

HDMI1

 

HDMI1 audio

 

 

 

Auto.

 

 

 

 

 

Lip Sync

 

 

 

EXT2 input

 

AV

 

Woofer

 

Internal

 

 

 

 

 

MENU Back

EXIT Watch TV

If the sound is missing select an alternative setting.

NOTE: HDMI1 supports digital and analogue sound, HDMI2 is digital sound only.

Certain formats of DVD disk may not output from this TV (32/44.1/48kHz and 16/20/24 bits are acceptable).

Lip Sync Latency

Lip Sync can synchronize the sound and picture. This feature is only available when equipment compatable with Lip Sync is connected via HDMI.

1In the AV connection menu press eto highlight Lip Sync.

2Using zor xselect On or Off.

28