Toshiba C300 Reset, Clock phase, Sampling clock, Picture position

PC settings – picture position, clock phase,

sampling clock, reset

English

Picture position

Connect the PC (as shown in the ‘Connecting a PC’ section) and ensure that a picture is showing on the television screen. The picture position may now be adjusted to suit personal preference.

1Press Bto select PC, then select PC Setting from the SET UP menu.

	SET UP
Language		English
Country		UK
AV connection		OK
PC Setting		OK
MENU Back	EXIT Watch TV

2Press OK. Press fand eto select an option, then zor xto adjust the settings.

	PC Settings	1/2
Horizontal position
		0
Horizontal width		– 5
Vertical position		0
Vertical height		– 5
Clock phase		0
Sampling clock		0
MENU Back	EXIT Watch TV

Clock phase

The Clock phase matches the PC signal with the LCD display. Adjusting this can clear horizontal stripes and picture blur.

1In the SET UP menu press euntil PC Setting is highlighted.

2Press OK to select, then eto highlight Clock phase.

3Use zor xto adjust until the picture clears.

Sampling clock

Adjusting the Sampling clock alters the number of pulses

per scan, this will clear vertical lines on the screen.

1In the SET UP menu press euntil PC Setting is highlighted.

2Press OK to select, then eto highlight Sampling clock.

	PC Settings	1/2
Horizontal position		0
Horizontal width		– 5
Vertical position		0
Vertical height		– 5
Clock phase		0
Sampling clock		0
MENU Back	EXIT Watch TV

3Use zor xto adjust until the picture clears.

Reset

To return to the original factory settings.

1In the SET UP menu press euntil PC Setting is highlighted.

2Press OK to select, then eto highlight Reset.

3Press OK.

NOTE: When a PC is connected using HDMI none of these functions will be available.

23