Toshiba DKT2004-CT manual Account Code Calls, Tone/Pulse Dialing, Forced Account Codes

Features

Account Code Calls

Tone/Pulse Dialing

With some older Central Offices, you may have to make calls using rotary dial pulses on outside lines. To access remote equipment (such as an answering machine) requiring Dual-tone Multi-frequency (DTMF) tones while on these lines, you must set

your telephone for tone dialing after you have dialed the telephone number. Your telephone must have a 7RQH￿'LDO￿6HOHFW button assigned in system programming to

access this feature.

➤To change to Tone Dialing

1.Dial a telephone number on a line programmed for rotary dial pulses.

2.Press 7RQH￿'LDO￿ 6HOHFW while the call is in progress.

Although the line is programmed for rotary dial pulses, you can access the line and dial the telephone number like any other call described in this guide.

The Tone Dial Select LED lights steady, and you can send DTMF tones with your dial pad. If the LED is off, tone dialing is not selected, and you cannot send DTMF tones.

Note When originating or receiving a new call, the system automatically places the line in the dial pulse mode.

Account Code Calls

Account Codes can be entered before or after a call. Some of the code applications include billing, tracking, and line restriction. Account Codes are recorded by the system and can, along with the details of the calls they are associated with, be printed out on a Station Message Detail Recording (SMDR) report.

Forced Account Codes

Some applications may require that you enter a Forced Account Code before dialing the telephone number.

40 Strata DKT2004-CT Cordless Digital Telephone 9/00