Toshiba DKT2004-CT manual To set Call Forward-All Calls

Features

Call Forward

Telephones can have many [DN] buttons, but the telephone must be the designated owner of a [DN] before you can Call Forward to the [DN]. Each telephone is usually the owner of at least one [DN] which is called the Primary Directory Number [PDN].

Your telephone can be programmed to have [PhDNs] in addition to [DNs]. Each [PhDN] can be set to any mode of Call Forward independent of other [DNs] on the telephone. Like the [DNs], your telephone must be the owner of [PhDNs], so that you can use any of call forward features. If you hear re-order tone when following any of the Call Forward steps, then your telephone is not the owner of the selected [PhDN].

When you forward calls to another destination, you see a message indicating the:

♦Type of Call forward.

♦Forwarded from [PhDN] and/or [DN].

♦Forwarded to destination number.

Note Call Forward–All Calls, Call Forward–No Answer, and Call Forward–Busy can only be activated when Speed Dial is assigned to an “)￿-)￿” function key or deleted from all buttons (use ￿). See “Access Codes” on Page 90.

Call Forward-All Calls

If your station is idle or busy and has this feature activated, all calls to it are forwarded immediately. The station does not ring.

➤To set Call Forward-All Calls

1.Press &DOO￿)UZG￿$OO￿ The Call Frwd All Calls LED flashes.

&DOOV

...or press a [PDN] or	You hear a confirmation tone.
[PhDN] + ￿￿￿￿.	Note [PhDNs] can only be forwarded by using
	the dial codes.

2.Enter the [DN] to which calls are forwarded.

Strata DKT2004-CT Cordless Digital Telephone 9/00 47