
Features
Message Waiting
Message Waiting
If you call a station [DN] and it is busy or its user does not answer, you can leave a message waiting indication by pressing the 0VJ button. The Msg LED at the called station flashes after you press the button. The user can call you back by pushing the 0VJ button with the flashing LED. (Voice mail devices, as well as people, can leave message waiting indications.)
All telephones have a fixed 0VJ button/LED for receiving/retrieving messages left by callers that called the [PDN]. Telephones that own [PhDNs] can also have flexible message waiting [PhDN/MW] buttons/LEDs for receiving/retrieving messages left by callers.
Each Message Waiting indication can accept up to four MW indications at each [DN] or [PhDN] at one time. One of the indications for each [DN] is reserved for the Message Center set in system programming.
➤To answer a Message Waiting
1.Press 0VJ when the Msg LED is flashing red. If there is no answer, hang up and try at a later time.
2.Press 7$/. after receiving the message to terminate the call.
3.Repeat the Steps to retrieve additional messages.
Your telephone rings the station or voice mail device that set the indication. If there is no answer, the LED continues to flash.
Voice mail devices may cancel the indication after a short delay.
The Msg LED flashes if you have more messages.
The called party must
➤ To cancel Message Waiting
➤ Press 0VJ to answer | The Msgindication is cancelled when the called |
| party answers. |
|
|
64 | Strata |