26
Enter an Abbreviated Dial Num-
ber from 1 to 999.
Make sure that the 3-digit num-
ber (001 to 999) appears cor-
rectly, then press:
NOTE:
Any leading zero (0) can be
omitted from the Abbreviated
Dial Number.
ABB. NBR= 001
ID NAME =(MAX20)
After 2 seconds:
Enter an ABB. Dial Number
3
ENTER NAME
ID NAME =(MAX20)
If the ABB. Dial Number you
entered has not been previ-
ously registered, the following
screen will be displayed. Skip
to Step 5.
If the ABB. Dial Number you
entered has been previously
registered, continue to the next
step.
If the selected Abbreviated Dial
Number has been previously
registered, the following infor-
mation will be displayed on the
LCD display.
When a Preset ABB.Dial Number is Active
4
After 2 seconds:
ABB. NUMBER ENTRY
ALREADY ASSIGNED
ABB. NUMBER = 001
NEW YORK OFFICE
See the section “Modify/Delete
the Abbreviated Dial Number”
and continue the operation.
Enter the Location ID name of
the remote party to be as-
signed to the current Abbrevi-
ated Dial Number.
When the name is displayed
correctly on the LCD display,
press:
Enter the LocationID Name
5
ABB. NUMBER ENTRY
1.CANCEL
2.MODIFY
3.RETAIN
ABB. NBR= 001
1.TEL NUMBER
2.E-MAIL
To register an E-mail address
for the Abbreviated Dial Num-
ber, Press:
Select the type
6
Abbreviated Dialer Registration - continued
PRESS SPEED DIAL FOR
ADDRESS SEARCH OR
ENTER TO ENTER
E-MAIL ADDRESS
If the E-mail address is already
assigned to this Abbreviated
Dial Number, the following
screen appears.
After 2 seconds:
E-MAIL ADDRESS
ALREADY ASSIGNED
001@toshiba.com
See the section “Modify/Delete
the Abbreviated Dial Number”
and continue the operation.
E-MAIL ADDRESS
1.CANCEL
2.MODIFY
3.RETAIN