83
Setting Up a Relay Box with E-mail Address - continued
Enter the End Station - continued
8
If an Abbreviated Dial Number
is assigned to the end station,
press:
Enter the Abbreviated Dial
Number.

Enter the Abbreviated Dial Number of End Station

8b
ABB. NUMBER =(1-999)
XX
Then press:
Continue the operation from the
beginning of Step 8.
If no E-mail address is as-
signed to the Abbreviated Dial
Number, the following screen is
displayed.
After 2 seconds:
ABB. NUMBER= XXX
NOT AN EMAIL ADDRESS
RELAY END NUMBER
PRESS E-MAIL KEY,
SPEED DIAL KEY OR
ONE TOUCH KEY
Try again from the beginning of
Step 8.
After 2 seconds:
RELAY END NUMBER
ABB. NUMBER= XXX
XXXXXXXX
RELAY END NUMBER
ABB. NUMBER= XXX
ENTER MORE OR
PRESS [START]
Complete the EndStation Entry
9
When all the desired End Sta-
tion Entries (One Touch Keys
or Abbreviated Dial Numbers)
are completed under the same
Relay Box, press:
TRANSMISSION REPORT
ENTER TEL NUMBER,
SPEED DIAL KEY OR OT
ENTER TO COMPLETE
Enter the facsimile number
you want to send the relay
transmission report (relay
transmission End Stations re-
sults) to.
If you do not desire a relay
transmission report, press:
.
The following screen is dis-
played for about 2 seconds to
indicate that the Mailbox is
registered.
Enter the Number to send the TransmissionResult
10
REGISTERED
Enter the facsimile number us-
ing the Dial Keypad.
Then press:
The following screen is dis-
played for about 2 seconds to
indicate that the Mailbox is reg-
istered.
TRANSMISSION REPORT
TEL NUMBER =(MAX128)
XXXX
REGISTERED

Enter the Number Using

the Dial Keypad

10a
The display returns to the
screen in Step 2.