51
Group Number Registration - continued
Repeat this step until all of the
required remote station ad-
dresses are entered. Then go to
Step 8.
NOTE:
• When the entered Abbrevi-
ated Dial Number or One
Touch key has not been
registered with an E-mail
address, the display shows
the message “NO ENTRY.”
Then returns to Step 5.
• When the entered Abbrevi-
ated Dial Number or One
Touch key is already as-
signed in this group, the dis-
play shows the screens be-
low.
Go to Step 7a or Step 7b.
To delete the existing remote
station from this group, press:
(to CANCEL)
To retain this remote station in
this group, press:
(to RETAIN)
When all the stations neces-
sary for this group are entered
in Step 6, press:

Cancel the Group

Number Setting

7a

Retain the Group

Number Setting

7b

Complete Group

Station Entries

8
GROUP NUMBER= 0001
ALREADY ASSIGNED
ABB. NBR= 118
DENVER OFFICE
ABB. NBR= 118
CANCEL ?
1.CANCEL
2.RETAIN
After 2 seconds:
After 2 seconds:
GROUP NUMBER= 0001
ABB. NBR= 118
CANCELLED
GROUP NUMBER= 0001
ENTER ABB. NBR OR OT
[ENTER]:TO COMPLETE
Return to Step 6.
GROUP NUMBER= 0001
ENTER ABB. NBR OR OT
[ENTER]:TO COMPLETE
Return to Step 6.
GROUP NUMBER= 0001
PRESS ONE TOUCH KEY
TO ENTER OR
[ENTER]:TO SKIP

Enter a Remote Station - continued

6
Enter the E-mail addresses of
the remote stations to be pre-
set in the group.
If a remote station is assigned
to a One Touch key, press the
One Touch key.
If a remote station is assigned
to an Abbreviated Dial Num-
ber, enter the number then
press .
Example:
Abbreviated Dial Number
118 (preset as DENVER
OFFICE):
+
+
+
After 2 seconds:
GROUP NUMBER= 0001
ABB. NBR=118
DENVER OFFICE
GROUP NUMBER= 0001
ABB. NBR= 118
ENTER ABB. NBR OR OT
[ENTER] TO COMPLETE