82
Setting Up a Relay Box with E-mail Address - continued
Enter the End Station
8
Repeat this step until all of the
required end stations are en-
tered. Then go to Step 9.
NOTE:
Also the facsimile numbers
can be assigned to a Relay
Box where E-mail ad-
dresses have been as-
signed. To assign the fac-
simile numbers to a Relay
Box, see the section about
“RELAY TRANSMISSION”
in the DP120F/125F
OPERATOR’S MANUAL.

Enter the One Touch Key of End Station

8a
If an end station is assigned to
a One Touch Key, press:
Example: One Touch Key 35.
Continue the operation from the
beginning of Step 8.
After 2 seconds:
RELAY END NUMBER
ONE TOUCH = 35
XXXXXX
RELAY END NUMBER
ONE TOUCH = 35
ENTER MORE OR
PRESS [START]
Press:
RELAY END NUMBER
PRESS SPEED DIAL KEY
OR ONE TOUCH KEY
NOTE:
Group Numbers cannot be
used in conjunction with E-
mail addresses in a relay
box.
Try again from the beginning of
Step 8.
After 2 seconds:
RELAY END NUMBER
ONE TOUCH = 35
NOT ENTRY
RELAY END NUMBER
PRESS E-MAIL KEY,
SPEED DIAL KEY OR
ONE TOUCH KEY
If no E-mail address is as-
signed to this One Touch key,
the following screen is dis-
played.