2 INSTALLATION

Installing the TOSHIBA Viewer

Before installing the TOSHIBA Viewer

Before installing TOSHIBA Viewer, your TOSHIBA e-STUDIO163/203/165/205 must be con- nected to your PC via a USB cable suitable for bi-directional communications.

Please make sure that following terms are satisfied.

yWhen using Windows 2000/XP/Server 2003, make sure you have Administrator access rights.

yClose all applications that are running to avoid any conflicts during installation.

yThe TOSHIBA e-STUDIO163/203/165/205 connected to your PC is powered on.

When the Plug-and-Play prompt is displayed...

When the Plug-and-Play prompt is displayed as soon as Windows is started, install the USB driver before installing the TOSHIBA Viewer.

About the instructions for installing the driver, see the following page. P.17 “Installing the USB Driver”

Installation

Prompts may vary depending on your PC configuration. The screens show examples of Win- dows XP.

1 Insert the TOSHIBA Viewer CD-ROM in to the CD-ROM drive. Click [Start] and select [Run].

66 Installing the TOSHIBA Viewer

Page 66
Image 66
Toshiba e-STUDIO163/203 manual Installing the Toshiba Viewer, Before installing the Toshiba Viewer, Installation