Toshiba ES8, ES48, IES32, ES96R2, IES16 manual ³ To use the Call Forward button sequence

Using Stratagy ES with a Strata CIX/CTX

Call Forward

³To use the Call Forward button sequence

³Follow the instructions in Table 1 below shown under “Button Sequence.” Some features require additional input, such as:

•Destination – If the destination is an outside number, press ￿￿after entering the destination. The CIX/CTX accepts destination numbers of up to 32 digits.

•Timer – This is a two digit entry representing how long (8 to 160 seconds) your telephone should ring before forwarding the call. If you enter one digit, you must press ￿￿after entering the single digit.

Also, in the following table, (Tone) means that a confirmation tone plays at that point in the sequence.

Table 1 Call Forward Procedures

Feature Button Sequence

Call Forward - Station

Call Forward Any Call (Internal and Incoming Line)

All Call	Press Extension button + ￿￿￿￿￿ (Tone) + Destination No. (Tone)
Busy	Press Extension button + ￿￿￿￿￿ (Tone) + Dest. No. (Tone)
No Answer	Press Extension button + ￿￿￿￿￿ (Tone) + Dest. No. (Tone) + Timer + ￿
Busy No Answer	Press Extension button + ￿￿￿￿￿ + Dest. No. + Timer + ￿
Cancel	Press Extension button +￿￿￿￿￿￿ (Tone)

Call Forward - System

Call Forward - Incoming Line Calls

All Calls	Extension button + ￿￿￿￿￿ (Tone) + Dest. No. (Tone)
Busy	Extension button + ￿￿￿￿￿ (Tone) + Dest. No. (Tone)
No Answer	Extension button + ￿￿￿￿￿ + Dest. No. (Tone) + Timer (Tone) + ￿
Busy No Answer	Extension button + ￿￿￿￿￿ + Dest. No. (Tone) + Timer (Tone) + ￿
Cancel	Extension button + ￿￿￿￿￿ (Tone)
Call Forward - System
Activate	#620 (Tone)
Cancel	#621 (Tone)

82 Stratagy ES User Guide 04/05