Toshiba DVR16-X, DVR8-X, EVR16-X, EVR32-X, EVR8-X, EVR64-X , 3.1 Turning on the DVR , , 3.2 Turning off the DVR

21

3.1 Turning on the DVR

Once the cables and adapters have been properly connected (See Chapter 2) it is time to turn on the power. To turn on

the power follow these steps:

Turning the DVR unit ON

1) Turn on the monitor and any external peripherals (ex. Printers, External Storage Devices, etc.) connected to the

DVR unit.

2) Turn on the Secondary Power Switch located in the rear of the DVR unit.

3) Turn on the main power switch located on the front of the DVR unit.

The DVR will run a series of self-tests. After two or three minutes a series of messages may be displayed as the

various hardware and software subsystems are activated. Under normal circumstances you should not be asked

to respond to these messages. If you are asked to respond to the messages (adding a Printer, Monitor, etc for the

first time) follow the instructions carefully.

After this finishes, the Surveillix DVR software should load automatically and bring you to the main screen.

3.2 Turning off the DVR

Turning the DVR unit OFF

1) To turn off the DVR unit, select the Exit button from the main screen. This will prompt you whether you wish to exit

the program or not. Select yes. The DVR unit will shut itself off automatically once this is done. The DVR unit may

take several minutes to shut down completely.

CAUTION: Always be sure to follow the proper procedures when turning off the power to the DVR unit. NEVER

disconnect the power to the DVR unit while it is still running or in the process of shutting down. Doing so can cause data

loss, file corruption, system instability and hardware failure.

Contents

Main Page Page v Surveillix DVR User Guide Manual Edition 26158AM SEPTEMBER 2006 Printed in USA LIMITED WARRANTY DIGITAL VIDEO RECORDER Rack Mount Instructions UL Notice CE Notice Safety Precautions WARNING IMPORTANT SAFETY INSTRUCTIONS 1. Read Owners Manual IMPORTANT SAFETY INSTRUCTIONS Notes on Handling Note on Moisture Condensation Notes on Locating Notes on Maintenance Notes on Cleaning Table of Contents Page Page Page Preface About this Guide Technician Notes Introduction What is a Surveillix DVR New Features Toshibas Surveillix DVRs include the following new features: Page DVR Description 1.1 Basic Features Page 1.2.2 KV-EVR 1.3 Rear Panel Connectors 1.3.1 KV-DVR 1.3.2 KV-EVR Page Getting Started 2.1 Identifying included components Manual 2.2 Keyboard Setup 2.3 Mouse Setup 2.4 Monitor Setup 2.5 Power Setup 2.6 Connecting a Video Source to the DVR 2.8 Connecting Sensors to the DVR 2.9 Connecting Control Outputs to the DVR TXLED 2.10 Looping Outputs 2.11 Additional Outputs and Connectors 2.12 Swappable Hard drives 2.12.1 Swapping a Hard Drive 2.13 Monitor Setup 2.14 Optional Components DVR Basics 3.1 Turning on the DVR 3.2 Turning off the DVR Turning the DVR unit OFF 3.3 HVR/NVR Registration and Upgrade Important Information with your purchased software. Obtaining your Unlock Code Page Page Obtaining your Unlock Code Page 3.5 Display Screen 3.6 Camera View 3.7 Recording Status Indicator 3.8 Screen Division Menu Page Setup Options 4.1 Setup Overview 4.1.1 Setup Screen Overview 4.2 Camera Setup 4.2.1 Network Device Setup Setting up a Network Device 4.3 Motion Page 4.4 Frame Setup 4.4.1 Maximum PPS Table (Frame Setup) Page 4.5 Schedule Setup (Recording) 4.5.1 Schedule Setup (Sensor) 4.5.2 Creating a Recording Schedule (Motion and Continuous) Creating a Recording Schedule Based on Motion & Cont 4.5.3 Creating a Recording Schedule (Sensor) Creating a Recording Schedule Based on a Sensor Alarm Scheduling Alarm Events (MOTION) 4.5.5 Scheduling Alarm Events to send video to the Emergency Agent 4.5.7 Creating and Editing a Special Day Schedule Creating a Special Day Schedule Deleting a Special Day Schedule 4.6 Sensor Page 4.7.1 Voice Warning 4.7.2 Video Loss Alarm 1 4.7.3 Intensive Recording Overview 4.7.4 Intensive Recording Activating Intensive Recording 1 4.7.5 Audio 4.7.6 Video Loss Alarm 4.7.7 Auto Sequencing 4.7.8 Network (Setup for Remote Connections) 4.8 Two-Way Audio Enabling 2-Way Audio Activating a 2-Way Audio Connection (from the Remote Software) Activating a 2-Way Audio Connection For The First Time Page Page 4.10 Information 4.11 Administrative 4.11.1 User Management 4.11.2 User Rank 4.11.3 Changing the Administrator Password Changing the Administrator Password 4.11.4 Storage Check Page Page Search Options Page 5.2 Play Controls 5.3 Hour / Minute Control Bar 5.4 Advanced Options Zooming in on an image Zooming in on a portion of an image Synchronizing the Video to the Real Time Clean Image 5.5 Search Options Overview 5.6 Performing a Basic Search 5.7 Daylight Savings Time Accessing the Daylight Savings Time lost hour: 5.8 Print/Open/Export Images 5.8.1 Print To print an image, follow these steps: 5.8.2 Save to JPG or AVI 5.8.3 Single Clip Backup 5.9 Index Search Performing an Index Search Page Page Page Page Performing an Object Search 5.12 Graphic Search Page Pan / Tilt / Zoom 6.1 PAN/TILT/ZOOM Overview 6.2 Setting Up a PTZ Camera Setting up a PTZ Camera Page Page Setting up a PTZ Camera 6.3 PTZ Setup 6.4 Creating and Viewing Preset Positions Creating a Preset: 6.5 PTZ Address Setting 6.6 Accessing PTZ Menus 6.7 Using the onscreen Compass Using the Onscreen Compass: 6.7.1 Using the onscreen controller and Compass 6.8 Understanding tours 6.9 PTZ Tour Scheduling Page Backing up to a CD-RW Drive 7.1 Backup Overview 7.2 DirectCD Format Utility CAUTION: 7.3 Formatting a CDR or CD-RW from Windows 2 3 7.4 Formatting a CDR or CD-RW from the Backup Window 7.5 Backup Options Overview Page 7.6 Scheduled Backup Options Overview Page 7.9 Single Clip Backup 7.10 Backing up to a CD-RW Drive or Hard Drive Backing up to a CD-RW Drive or Hard Drive 7.11 Removing the Disc from the CD-RW Drive Removing the Disc from the CD-RW Drive 7.12 Setting the DirectCD Path using vFormat Setting the DirectCD Path using vFormat Note: LAN / ISDN / PSTN Connections 8.1 LAN Overview 8.2 Connecting to a LAN using TCP/IP Page Page Digital Signature Verifier 9.1 Digital Signature Overview 9.2 Installation 9.3 Using the Digital Signature Verifier Page Backup Viewer 10.1 Backup Viewer Overview 10.2 Installation Page Page 10.3 Loading Video from CDROM or Hard Drive Emergency Agent 11.1 Emergency Agent Overview 11.2 Installing the Emergency Agent 11.3 Configuring the DVR 11.4 Configuring the Client PC 11.5 Emergency Agent Window 11.6 Search Alarm Window 13. JPG File When selected a JPG image is exported when Export is clicked. 11. Next Alarm Moves to next Alarm Event. 11.7 Configuration Window Page Web Viewer 12.1 Web Viewer Overview 12.2 Configuring the Server for Remote Connection 12.3 Connecting to a DVR using Web Viewer 12.4 Closing the Web Viewer Page Remote Software 13.1 Remote Software Overview 13.1.1 Remote Client Minimum Requirements 13.1.2 Remote Client Recommended Requirements 13.2 Remote Software Setup 13.2.1 Installing Remote Software 13.2.2 Create a New Remote Connection 1. New Creates a new site to connect to. Creating a New Remote Connection 13.3 Remote Server Setup In order to access the DVR unit remotely, the DVR Server must be setup to allow remote connections. 3. Enter Port Used by the DVR to transfer the connection data. Page Appendix A A1 KV-DVR Specifications A2 KV-EVR Specifications