80
The PTZ Setup allows you to enable PTZ cameras, create Presets, Tours, and also adjust speed settings. Many
options listed here are features only available on selected cameras.
RS485 / RS232 – Defines how to send the PTZ signal to the camera.
Select Camera – Selects the current camera to be edited.
Protocol – Selects the protocol to use for the selected camera. The protocol is the unique set of instructions
that allows the DVR to communicate with the PTZ camera.
Enable Pan/Tilt – Enables the DVR to control the PTZ camera.
Open PTZ Controller – This option opens the PTZ controller allowing you to move the PTZ camera.
On Screen Compass – This option allows on-screen PTZ Control. This allows you to move the PTZ camera by
simply clicking on the video itself instead of using the controller.
Figure 6.3
1
2
3
4
5
6
1
8
2
4
5
7
13
Figure 6.3
PTZ Setup
3
6
9
10
11
12
14