45
4.7 General
Voice Warning – Allows you to use an audible warning (.wav Sound Clip) for when Motion or Sensors are
activated.
Video Loss Alarm Beep – This option enables the internal audio alarm when Video loss is detected.
Video Loss Alarm Output – This option activates Alarm Control Output when video loss I detection. The Alarm
Control Output is the last Control Output on the DVR (#16 on a 16ch DVR and #8 on an 8CH DVR)
Video Loss Alarm – This option sends video loss information to the log files.
OSD Font Size – This option allows you to adjust the On Screen Display Font size for cameras.
Display Control Status Bar – Enables/Disables Control Status Bar on the Main Display Screen. (See section
3.3).
OSD Bold – This option makes the OSD Font Bold.
Display Sensor Status BAR – Enables/Disables the Sensor Status Bar on the Main Display Screen. (See
section 3.3).
Display Motion Detection Area Box – Displays the Motion area box on the Main Screen whenever motion
occurs.
Intensive Recording – The Intensive Recording option increases the FPS recording of a camera that is
experiencing an alarm event.
Beep on Log-in fail – This option activates an audio alarm when a user enters incorrect login information 3
times.
Audio – Opens the Audio ENABLE/DISABLE options.
Volume – Opens the Volume controls that affect the Audio Recording levels.
Sequence Setting – Allows your picture to your video out to automatically cycle through channels at set speed.
E.g. cycle through channels 1 – 6 at 4 second intervals.
Figure 4.7
1
2
3
4
5
6
7
8
9
10
1
2
3
5
4
6
7
8
9
11
12
12
10
11