Toshiba EVR8-X, DVR8-X Creating and Viewing Preset Positions, Creating a Preset, Viewing a Preset

81

7Preset and Tour – These options allow you to create Presets and Tours for the PTZ camera. Since each camera creates these in a different way, there can be multiple ways to do this.

8Pan Speed – This option increases or decreases the Pan speed.

9Tilt Speed – This option increases or decreases the Tilt speed.

10Zoom Speed – This option increases or decreases the Zoom speed.

11Focus Speed – This option increases or decreases the Focus speed

12Address Setting – These options are only available on select PTZ cameras

13Serial Port Settings – Defines the specific settings to transmit to the PTZ.

14Tour Schedule – This option allows the user to set specific tour schedules for each camera channel depending on the hour and day of the week.

6.4Creating and Viewing Preset Positions

A Preset Position is a user defined location where the camera can be pointed, zoomed in, and focused. You can define up to 10 preset positions per camera.

Creating a Preset:

1)Inside Setup, select the PTZ setup option and select the camera you wish to edit.

2)Inside the Pan Tilt Detail Setup select a Preset (1-10) using the Preset Select buttons. (See Figure 6.4)

3)Move the selected camera to the desired position using the Pan/Tilt/Zoom/Focus controls.

4)	Once you have the camera in the desired position, press a Preset	Figure 6.4
	State button (1-10).
5)	Select a Preset Position by clicking on a preset number (Presets
	1-12).
	The Preset is now saved.

Viewing a Preset:

1)From the Main Display Screen select the PTZ camera by clicking on it.

2)Using the keyboard press the number keys corresponding with the Preset Positions.

The Camera will move to the saved Preset.