33
Select Camera – Selects the current camera to be edited.
Camera Name – Allows you to specify a name for each camera.
Sensor Connections – Allows you to attach one or more sensor connections to each camera.
You can connect one or more Sensors to the selected camera by checking the box next to the sensor(s).
Connecting a sensor to the camera allows you to activate both Standard Recording and Intensive Recording
Bright – Adjusts the Brightness of the selected camera.
Hue – Adjusts the Hue of the selected camera.
Contrast – Adjusts the Contrast of the selected camera.
Adjust Default – Adjust the color settings for the selected camera back to the System default.
Adjust All Default – Adjusts the color settings for ALL cameras to the System default.
Apply to all channels – Applies current settings to ALL cameras.
Setup Network Device – Sets up a Network Device from a specified address.
Use Network Device – Enables setup and use of a Network Device.
Enable Network Device PTZ – Enables the use of a Network Device PTZ.
1
2
3
4
5
6
Figure 4.2
Camera Setup
2
6
5
1
4
3
8
7
8
9
9
10
10
11
11
10
12
12
7