Toshiba DVR16-X, DVR8-X, EVR16-X, EVR32-X, EVR8-X, EVR64-X 13.3 Remote Server Setup , 13.3.1 Configuring the Server for Remote Connection

128

13.3 Remote Server Setup

In order to access the DVR unit remotely, the DVR Server must be setup to allow remote connections.

1. Disable Remote Enables/Disables acceptance of remote connections by the DVR server.

2. Time Out Value Specifies a value (in seconds) to wait for a signal from the Surveillix Remote Client. If a signal

is not received by that time, the connection is dropped.

3. Enter Port Used by the DVR to transfer the connection data.

4. Image Port Used by the DVR to transfer the image data.

5. Search Port Used by the DVR to transfer the search data

13.3.1 Configuring the Server for Remote Connection

The DVR can have up to 5 Simultaneous remote Connections. Each user can perform functions on the DVR unit and

will not affect the other users. The only exception to this is accessing Setup. Only one user is allowed to access setup

1. Enter Setup on the DVR unit.

2. Click the Communication Setup button to open the Network menu.

3. Uncheck the Disable Remote Control option.

You should now be allowed to adjust port settings if necessary.

NOTE: If you are using a Firewall, it may be necessary to adjust the port settings on both the DVR and the

Firewall. Contact your Network Administrator for more information.

4. Press OK.

5. Make sure a User account is created.

Without a user account, the Administrator account must be used.

The DVR server is now ready to receive incoming connections.

Contents

Main Page Page v Surveillix DVR User Guide Manual Edition 26158AM SEPTEMBER 2006 Printed in USA LIMITED WARRANTY DIGITAL VIDEO RECORDER Rack Mount Instructions UL Notice CE Notice Safety Precautions WARNING IMPORTANT SAFETY INSTRUCTIONS 1. Read Owners Manual IMPORTANT SAFETY INSTRUCTIONS Notes on Handling Note on Moisture Condensation Notes on Locating Notes on Maintenance Notes on Cleaning Table of Contents Page Page Page Preface About this Guide Technician Notes Introduction What is a Surveillix DVR New Features Toshibas Surveillix DVRs include the following new features: Page DVR Description 1.1 Basic Features Page 1.2.2 KV-EVR 1.3 Rear Panel Connectors 1.3.1 KV-DVR 1.3.2 KV-EVR Page Getting Started 2.1 Identifying included components Manual 2.2 Keyboard Setup 2.3 Mouse Setup 2.4 Monitor Setup 2.5 Power Setup 2.6 Connecting a Video Source to the DVR 2.8 Connecting Sensors to the DVR 2.9 Connecting Control Outputs to the DVR TXLED 2.10 Looping Outputs 2.11 Additional Outputs and Connectors 2.12 Swappable Hard drives 2.12.1 Swapping a Hard Drive 2.13 Monitor Setup 2.14 Optional Components DVR Basics 3.1 Turning on the DVR 3.2 Turning off the DVR Turning the DVR unit OFF 3.3 HVR/NVR Registration and Upgrade Important Information with your purchased software. Obtaining your Unlock Code Page Page Obtaining your Unlock Code Page 3.5 Display Screen 3.6 Camera View 3.7 Recording Status Indicator 3.8 Screen Division Menu Page Setup Options 4.1 Setup Overview 4.1.1 Setup Screen Overview 4.2 Camera Setup 4.2.1 Network Device Setup Setting up a Network Device 4.3 Motion Page 4.4 Frame Setup 4.4.1 Maximum PPS Table (Frame Setup) Page 4.5 Schedule Setup (Recording) 4.5.1 Schedule Setup (Sensor) 4.5.2 Creating a Recording Schedule (Motion and Continuous) Creating a Recording Schedule Based on Motion & Cont 4.5.3 Creating a Recording Schedule (Sensor) Creating a Recording Schedule Based on a Sensor Alarm Scheduling Alarm Events (MOTION) 4.5.5 Scheduling Alarm Events to send video to the Emergency Agent 4.5.7 Creating and Editing a Special Day Schedule Creating a Special Day Schedule Deleting a Special Day Schedule 4.6 Sensor Page 4.7.1 Voice Warning 4.7.2 Video Loss Alarm 1 4.7.3 Intensive Recording Overview 4.7.4 Intensive Recording Activating Intensive Recording 1 4.7.5 Audio 4.7.6 Video Loss Alarm 4.7.7 Auto Sequencing 4.7.8 Network (Setup for Remote Connections) 4.8 Two-Way Audio Enabling 2-Way Audio Activating a 2-Way Audio Connection (from the Remote Software) Activating a 2-Way Audio Connection For The First Time Page Page 4.10 Information 4.11 Administrative 4.11.1 User Management 4.11.2 User Rank 4.11.3 Changing the Administrator Password Changing the Administrator Password 4.11.4 Storage Check Page Page Search Options Page 5.2 Play Controls 5.3 Hour / Minute Control Bar 5.4 Advanced Options Zooming in on an image Zooming in on a portion of an image Synchronizing the Video to the Real Time Clean Image 5.5 Search Options Overview 5.6 Performing a Basic Search 5.7 Daylight Savings Time Accessing the Daylight Savings Time lost hour: 5.8 Print/Open/Export Images 5.8.1 Print To print an image, follow these steps: 5.8.2 Save to JPG or AVI 5.8.3 Single Clip Backup 5.9 Index Search Performing an Index Search Page Page Page Page Performing an Object Search 5.12 Graphic Search Page Pan / Tilt / Zoom 6.1 PAN/TILT/ZOOM Overview 6.2 Setting Up a PTZ Camera Setting up a PTZ Camera Page Page Setting up a PTZ Camera 6.3 PTZ Setup 6.4 Creating and Viewing Preset Positions Creating a Preset: 6.5 PTZ Address Setting 6.6 Accessing PTZ Menus 6.7 Using the onscreen Compass Using the Onscreen Compass: 6.7.1 Using the onscreen controller and Compass 6.8 Understanding tours 6.9 PTZ Tour Scheduling Page Backing up to a CD-RW Drive 7.1 Backup Overview 7.2 DirectCD Format Utility CAUTION: 7.3 Formatting a CDR or CD-RW from Windows 2 3 7.4 Formatting a CDR or CD-RW from the Backup Window 7.5 Backup Options Overview Page 7.6 Scheduled Backup Options Overview Page 7.9 Single Clip Backup 7.10 Backing up to a CD-RW Drive or Hard Drive Backing up to a CD-RW Drive or Hard Drive 7.11 Removing the Disc from the CD-RW Drive Removing the Disc from the CD-RW Drive 7.12 Setting the DirectCD Path using vFormat Setting the DirectCD Path using vFormat Note: LAN / ISDN / PSTN Connections 8.1 LAN Overview 8.2 Connecting to a LAN using TCP/IP Page Page Digital Signature Verifier 9.1 Digital Signature Overview 9.2 Installation 9.3 Using the Digital Signature Verifier Page Backup Viewer 10.1 Backup Viewer Overview 10.2 Installation Page Page 10.3 Loading Video from CDROM or Hard Drive Emergency Agent 11.1 Emergency Agent Overview 11.2 Installing the Emergency Agent 11.3 Configuring the DVR 11.4 Configuring the Client PC 11.5 Emergency Agent Window 11.6 Search Alarm Window 13. JPG File When selected a JPG image is exported when Export is clicked. 11. Next Alarm Moves to next Alarm Event. 11.7 Configuration Window Page Web Viewer 12.1 Web Viewer Overview 12.2 Configuring the Server for Remote Connection 12.3 Connecting to a DVR using Web Viewer 12.4 Closing the Web Viewer Page Remote Software 13.1 Remote Software Overview 13.1.1 Remote Client Minimum Requirements 13.1.2 Remote Client Recommended Requirements 13.2 Remote Software Setup 13.2.1 Installing Remote Software 13.2.2 Create a New Remote Connection 1. New Creates a new site to connect to. Creating a New Remote Connection 13.3 Remote Server Setup In order to access the DVR unit remotely, the DVR Server must be setup to allow remote connections. 3. Enter Port Used by the DVR to transfer the connection data. Page Appendix A A1 KV-DVR Specifications A2 KV-EVR Specifications