Installing Network Fax Software 15

Before installing client software
Before installing the client software, confirm the following to perform an appropriate installation.
When the AddressBook Viewer has already been installed:
The AddressBook Viewer cannot be double-installed or overwritten. If it is installed from other
Client Utilities CD-ROMs or similar, uninstall it and then install it again according to the following
procedure in order to use the latest one. The AddressBook Viewer included in this equipment
(e-STUDIO165/205, e-STUDIO167/207/237 or e-STUDIO182/212/242) can be used with the
e-STUDIO850 Series, e-STUDIO282 Series, e-STUDIO452 Series, e-STUDIO451C Series,
e-STUDIO3510C Series, e-STUDIO4520C Series, e-STUDIO6530C Series, e-STUDIO455
Series and e-STUDIO855 Series.
In addition, when uninstalling the current AddressBook Viewer, a dialog box which prompts you
to check the setting files deletion is displayed. Click [No] in the dialog box to leave the setting
files so that they can be used in the AddressBook Viewer to be newly installed.
When the AddressBook Viewer has not been installed:
There is no necessary operation in advance. Perform installation according to the following pro-
cedure.
Installing the N/W-Fax driver and AddressBook Viewer
You can install the N/W-Fax driver and AddressBook Viewer from the Client Utilities CD-ROM.
This section describes about installing the N/W-Fax driver and AddressBook Viewer in a Raw
TCP environment.
Installing from Client Utilities CD-ROM
This section describes how to install fax client software under Raw TCP environments through
TCP/IP, using an installer.
The N/W-Fax driver can be set up using the same connection as a printer driver such as, LPR
printing, IPP printing, and Novell printing. To set up the N/W-Fax driver using these connections,
please refer to the Printing Guide.

Installing the fax client software for Raw TCP connection using the installer

The procedure presented here describes the installation to Windows 2000 using the installer.
The procedure is the same when other versions of Windows are used. (The N/W-Fax driver can
also be installed using the Add Printer wizard. Please see the Printing Guide.)
Before installing the printer driver in a Raw TCP environment, confirm the following:
yThis equipment is connected to the network and turned on.
yThe TCP/IP setting is correct on this equipment and your computer.
1

Insert the Client Utilities CD-ROM into the CD-ROM drive.

yThe installer automatically starts and the Choose Setup Language dialog box
appears.
yWhen the installer does not automatically start, double-click “Setup.exe” in the Client
Utilities CD-ROM.