28 2.SENDING A FAX
3.About Originals (Cont.)
2
When using the Reversing Automatic Document Feeder
When the originals are placed on the Reversing Automatic Document Feeder, the uppermost page is the
first to be scanned and sent.
1
After aligning the edges of originals,
place them with their face up and slide
the guides to the width of the originals.
• LT/A4 size originals are rotated 90 degrees so that they are sent
as LT-R/A4-R originals.
• If a mixture of LD and LT, A3 and A4, or B4 and B5 originals are
placed, they are sent in their original sizes.
• To set the originals with different width, see P.33 “Sending dif-
ferent width originals”.
• When LD, LG, LT-R, COMP, A3 and B4, A4-R, B5 originals are
placed as shown in the figure on the right, the pre-entered
sender information is printed in the shaded position shown A in
the figure and sent to the remote Fax.
• Entering the sender information ( P.150 “2.Registering the Ter-
minal ID”)
• When LT, ST-R, A4, A5-R or B5-R originals are placed as shown
in the figure on the right, the pre-entered sender information is
printed in the shaded position shown B in the figure and sent to
the remote Fax.