User’s Manual 4-21
Operating Basics
How to make a Blu-ray disc Movie
1. Click Start → All Programs → DVD MovieFactory for TOSHIBA →
DVD MovieFactory Launcher to launch DVD MovieFactory.
2. Click Create Video Disc → New Project to invoke 2nd Launcher,
choose Blu-ray, then invoke DVD MovieFactory.
3. Add source from HDD Disk by click Add Video files button to invoke
browser dialog box.
4. Choose the source video then go to Next page to apply Menu.
5. After choose the menu template, press Next button to go to Burning
Page.
6. Choose the output type then press Burn button.
How to learn more about Corel DVD MovieFactory®
Please refer to the Help and Manual files for additional DVD MovieFactory
information.
Opening the DVD MovieFactory Manual Start → All Programs → DVD
MovieFactory for TOSHIBA → DVD MovieFactory User Manual
Important information for use
Note the following limitations when you write Video DVD or Blu-ray disc
Movie:
1. Editing digital video:
■Log in with Administrator rights to use DVD MovieFactory.
■Make sure that your computer is running on AC power when using
DVD MovieFactory.
■Operate the computer at Full Power. Do not use power-saving
features.
■While you are editing DVD, you can display preview. However, if
another application is running. The preview might not display
properly.
■DVD MovieFactory cannot edit or play copy-protected content.
■Do not enter Sleep or Hibernation Mode while using DVD
MovieFactory.
■Do not operate DVD MovieFactory immediately after turning on the
computer. Please wait until all Disc Drive activity has stopped.
■When recording to a DV-Camcorder, to ensure you capture all of
your data, let the camcorder record for a few seconds before you
begin recording your actual data.
■CD recorder, JPEG functions, DVD-Audio, mini DVD and Video CD
functions are not supported in this version.
■While recording video to DVD, please close all other programs.
■Do not run software like a screen saver because it can put a heavy
load on the CPU.
■There is no support for mp3 decode and encode.