4.6 Expansion Memory | 4 Replacement Procedures |
4.6Expansion Memory
Removing the Expansion Memory
To remove the memory module, make sure the computer is in boot mode:
1.Remove one M2.5x4 screw securing the expansion memory compartment cover.
2.Push the latches securing the memory module to the outside to release it (A). A spring will force one end of the module up (B).
3.Grasp the module and pull it out (C).
4.Seat the cover and secure its screws.
Figure 4-8 Removing the expansion memory
CAUTION: Do not touch the connectors on the expansion memory or on the computer. Debris on the connectors may cause memory access problems.
Satellite M70/Satellite Pro M70 Series Maintenance Manual | [CONFIDENTIAL] |
