Removing the LCD Module

4 Replacement Procedures

4.21 LCD Module

To remove the LCD module, first remove the display assembly and display mask, then follow the steps below.

1.Remove one M2.5x3 black screw and one M2x3 black screw securing the LCD cable and FL inverter board.

2.Disconnect the LCD cable from the FL inverter board.

3.Remove two M2.5x6 black screws securing the LCD module bracket to LCD cover.

4.Remove eight M2x3 black screws securing the LCD module bracket to the LCD module.

5.Lift it out.

Figure 4-41 Removing the LCD module-1

NOTE: If the LCD module malfunctions, remove the LCD cable and LCD bracket. Then replace the whole LCD module unit.

4-56

[CONFIDENTIAL]

Satellite M70/Satellite Pro M70 Series Maintenance Manual