Toshiba NB200 manual Starting the computer by password, Password

BIOS Setup and Passwords

Password

User Password / Supervisor Password

Select Set User Password / Set Supervisor Password and press Enter, then the following message is shown:

Set User Password	[	]
Enter New Password
Confirm New Password	[	]

If there is an old password set, setup will display the following and require that the existing password is entered first:

Set User Password	[	]
Enter Current Password
Enter New Password	[	]
Confirm New Password	[	]

The user can type password into the section titled Enter New Password, and re-enter the password for verification in the section titled Confirm New Password.

If the verification is correct, the following message is shown:

Setup Notice

Changes have been saved. [Continue]

The supervisor password can be set after the user presses enter. If the verification fails, the following message is shown:

Setup Warning

Password does not match Re-enter Password [Continue]

The formats of the password are no more than 8 characters and must be alphanumeric characters.

If you enter the password incorrectly three times in a row, the computer will shut off. You will not be able to access the password option in the BIOS setup menu. In this case you must turn the power on and back on to retry the procedure.

Starting the computer by password

If you have already registered a password, please enter the password manually to start the computer:

User’s Manual 7-2