LAMP Broken | ON (green) | ON (green) | Blink | 0.2 SEC |
|
|
|
| (green) |
|
|
|
|
|
|
|
|
Interlock | ON (green) | ON (green) | Blink | 0.5 SEC |
|
|
|
| (green) |
|
|
FAN NG | ON (green) | Blink | OFF | 0.2 SEC | Before light the Lamp |
|
| (green) |
|
|
|
|
|
|
|
|
|
Normal | ON (green) | ON (green) | ON (green) |
|
|
Preparation | Blink (red) | ON (green) | OFF | 0.5 SEC | Lamp shutdown |
|
|
|
|
| |
ON (red) | OFF | OFF |
| STANBY | |
|
| ||||
|
|
|
|
|
|
Note:
1.When power switch is turned ON, 2 LEDs, POWER and FAN will turn ON.
2.After lamp is safely turned on, then LAMP LED turns ON.
3.When display is turned off by remote control or operation software, this display will enter to
4.When main locker power switch is shut off, all the power will be off (full reset).
5.When any Fan had a difficulty and stop rotation, FAN LED starts to blink.
6.When lamp has difficulty and did not turn on, LAMP LED blinks.
Once the display entered to
This should be operated by the remote control or the software and hit POWER button on the remote control or software GUI after main locker switch is turned on and confirm that the red LED is lit, then click POWER button so that display will turn ON and power LED indicator changes to Green.
When main power is disconnected or power failure oc curred during its operation, the equipment will turn ON when power is restored.
34
