Toshiba PRO L450D manual You place a call, but a connection can’t be made, Can’t hear a ring

Troubleshooting

Problem

You place a call, but a connection can’t be made

Procedure

Make sure that the settings are correct within your communication application.

After making a call you	Ensure that the communication application's tone
can’t hear a ring	or pulse dialling selection feature is set correctly.
Communication is cut	The computer will automatically cut off
off unexpectedly	communication when connection with the carrier
	is not successful for a set time interval - try
	lengthening this time interval within your
	communication application.
A CONNECT display is	Ensure that the communication application's
quickly replaced by NO	error control feature is set correctly.
CARRIER
Character display	When transmitting data you should ensure that
becomes garbled	the parity bit and stop bit settings correspond
during a	with those of the remote computer - you should
communication	check the flow control and communication
	protocol settings within your communication
	application.
You cannot receive an	Ensure that the communication application's
incoming call	rings before auto answer feature is set correctly.
	If you are still unable to resolve the problem,
	contact your reseller, dealer or service provider.
Problem	Procedure
Cannot access LAN	Check for a firm cable connection between the
	LAN jack and the LAN HUB.
Wake-up on LAN does	Make sure the AC adaptor is connected. The
not work	Wake-up on LAN function consumes power even
	when the system is off.
	If problems persist, consult your LAN
	administrator.

User’s Manual 9-19