Toshiba PRO L450D manual Display, Boot Priority

HW Setup and Passwords

Not registered

If they do not match, the following message appears. You must repeat step 1.

Incorrect Password!!!

If you enter the password incorrectly three times in a row, the computer will shut down.

You will not be able to access the password option in the HW Setup. In this case you must turn the power off and back on to retry the procedure.

4.Follow the same procedures described in the earlier section, How to set the password, to set a new user password.

Display

This tab allows you to customize your computer’s display settings for either the internal LCD screen or for an external monitor.

Power On Display

Allows you to set the display to be used when the computer is booted.

Auto-Selected	Selects an external monitor if one is connected,
	otherwise, it selects the internal LCD display
	(Default).
System LCD only	Selects the internal LCD, even if an external
	monitor is connected.

Boot Priority

Boot Priority Options

This option sets the priority for booting the computer. Select the boot priority from the drop down list.

You can override the settings and manually select a boot device by pressing one of the following keys while the computer is booting:

F	Selects the USB floppy disk drive.
L	Selects the Network.
C	Selects optical device.

To select the boot drive you want, follow the steps below.

1.Boot-up your computer and press F12 to enter the boot menu.

2.The boot select screen will be displayed: HDD, CD/DVD, and LAN.

3.Use the upper/lower cursor keys to highlight the boot device you want and press Enter.

User’s Manual 7-3