Operating Basics

2. Plug the other end of the modular cable into a telephone jack.

Figure 4-9 Connecting the internal modem

Do not pull on the cable or move the computer while the cable is connected.

To disconnect the modular cable, follow the steps as detailed below:

1.Pinch the lever on the plug in the telephone jack and pull it out from within the connector.

2.Pinch the lever on the plug in the computer's modem jack and pull it out from within the computer.

The computer's wireless communication function supports Wireless LAN device.

The Wireless LAN is compatible with other LAN systems based on Direct Sequence Spread Spectrum/Orthogonal Frequency Division Multiplexing radio technology that complies with the IEEE802.11 Wireless LAN standard.

Frequency Channel Selection of 5GHz for IEEE 802.11a or n draft 2.0

Frequency Channel Selection of 2.4GHz for 802.11b/g or n draft 2.0

Roaming over multiple channels

Card power management

Wired Equivalent Privacy (WEP) data encryption based on an 128-bit encryption algorithm

Wi-Fi Protected Access™ (WPA™) support Advanced Encryption Standard (AES) data encryption

User’s Manual

4-28

Page 99
Image 99
Toshiba PRO L450D manual Connecting the internal modem