Operating Basics
Telecommunication regulations vary from one region to another, so you will need to make sure the internal modems settings are correct for the region in which it will be used.
The
To select a region, follow the steps as detailed below:
1.Click Start 
All Programs 
TOSHIBA 
Networking 
Modem Region Select.
If it is available, do not use the Country/Region Select function included as part of the modem setup utility within the Control Panel - if you change the country/region setting this way you may find that the change does not take effect.
2.The Region Selection icon will appear in the Windows Taskbar.
3.Click the icon with the primary (left) mouse button to display a list of regions that the modem supports, together with a
4.Select either a region from the region menu or a telephony location from the
When you click a region it becomes the modem's default selection for any new dialling locations that are created within the Windows Control Panel (Phone and Modem Options).
When you select a telephony location, the corresponding region is automatically selected and becomes the modem's default setting.
Click the icon with the secondary (right) mouse button in order to display a Properties menu on the screen.
Within the Properties menu you are able to either enable or disable the following settings:
AutoRun Mode
Allows you to configure whether the Modem Region Select utility starts automatically whenever you start up the operating system.
Open the Dialing Properties dialog box after selecting region
Allows you to configure whether the dialing properties dialog box will be displayed automatically after you have selected a region.
Users Manual |
