Toshiba PORTEGE T130D, PROT130D

Chapter 4 Replacement Procedures

5. Remove the following screws securing the HDD holder and remove the HDD holder.

 M3.03.0B FLAT BIND screw x4

M3*3 4pcs

Figure 4-3-3 Remove HDD

Installing HDD-H9.5mm

The following describes the procedure for installing the main HDD.

1. Install a HDD to the HDD holder and secure it with the fo llowing screws.

 M3.03.0F FLAT BIND screw x4

NOTE: Although they are 3mm head screws, screw torque must be set in 2.5kg-cm for

four screws securing the HDD holder.

2. Insert the HDD assembly into the HDD slot and connect it carefully to the MAIN

HDD on the system board.

3. Use a T6-bit TORX to secure the HDD assembly with the following screw.

 M2.04.0B T6 screw x2

Satellite T130D, Satellite Pro T130D , and PORTEGE T130D Maintenance Manual (960-Q08)