Chapter 4 Replacement Procedures
4.11 I/O Board
The following describes for removing the I/O Board (See Figure 4-11-1).
Removing the I/O Board
1. Pull out the I/O Board FFC, LAN FFC, Speaker cable from I/O board connector.
2. Loose the below screws and then incline pull out I/O Board.
M2.0x3.0 FLAT BIND screw x2
Figure 4-11-1 Remove the I/O Board
Satellite T130D, Satellite Pro T130D, and PORTEGE T130DMaintenance Manual (960-Q08)
4-43