Toshiba PORTEGE T130D, PROT130D

Chapter 4 Replacement Procedures

Satellite T130D, Satellite Pro T130D, and PORTEGE T130D Maintenance Manua l (960-Q08)

Installing the LCD unit

The following describes the procedure for installing the LCD unit.

Install the LCD supports (LCD unit side) and hinge to the LCD and secure them with the

following screws.

 M2.02.5 BINK screw x4

1. Stand the LCD unit on the display cover and connect the LCD harness to the

connector on the back of LCD.

2. Stick the kapton tape on the connector of LCD harness.

3. Secure the LCD unit with the following screws.

 M2.0x3.0 screw x6

4. Secure the display mask with following screws

M2. 05 screw x4

5. Cover screws with Screw MYLAR cover x4

NOTE: When installing the display mask, make sure there is no gap between the display

mask and the display cover.