Toshiba PORTEGE T130D, PROT130D

Chapter 4 Replacement Procedures

Satellite T130D, Satellite Pro T130D, and PORTEGE T130DMaintenance Manual (960-Q08)

4-38

Installing the Top cover assembly

The following describes the procedure for installing the Top cover assembly.

1. Install the Top cover assembly to the Base assembly.

NOTE: Be careful not to catch the cables between Top cover assembly and Base

assembly.

2. Connect the touch pad flat cable to the connector on the system board.

3. Secure the Top cover assembly with the following screws from the back and bottom

of computer.

 M2-0.42 FLAT BIND screw Back x6

 M2.56.5 FLAT BIND screw Back x2

 M2.05.0 FLAT BIND screw Back x11

4. Free the cable from cable-drain when through the antenna cable to PCB hole.