Chapter 4 Replacement Procedures
Satellite T130D, Satellite Pro T130D , and PORTEGE T130D Maintenance Manual (960-Q08)
4.5 Keyboard
Removing the keyboard
The following describes the procedure for removing the keyboard (See Figure 4-5-1 to 4-5-2).
CAUTION: As the keycap may fall out, when handling the keyboard alw ays hold it by the
frame and do not touch the keycap.
1. Upside down the computer and remove the battery.
2. Loose the screws on KB holder.
M2.0x2.0B Flat BIND screws x2
3. Open the display.
4. Insert your finger into the slot between the KB holder and the keyboard. Then, lift up
the keyboard holder to remove it.
5. Loose the screw securing Keyboard.
M2.0x3.0B Flat BIND screws x2
6. Insert your finger into the slot between keyboard and Top cover Assembly. Then lift
up the keyboard to remove it.
7. Disconnect keyboard cable.