Toshiba PORTEGE T130D, PROT130D 4.14 LCD unit

Chapter 4 Replacement Procedures

4.14 LCD unit

Removing the LCD unit

The following describes the procedure for removing the LCD unit (See Figure 4-14-1 to 4-

14-3).

1. Remove Screw MYLAR cover x4

2. Remove the following screws securing the display mask

M2.05 screw x4

3. Insert your finger between the edge of the display mask and the LCD, and remove the

display mask while releasing the latches of display mask. (Note: when removing the

display mask, please first remove from top side to the bottom in order to lessen the

degree of breaking.

Figure 4-14-1 Remove the display mask

4. Remove the following screws securing the LCD unit.

 M2.0x3.0 screw x4

5. With the bottom edge of the LCD unit on the display cover, lift only the top edge of

the LCD unit. After peeling off the kapton tape, disconnect the LCD harness from the

connector on the back of the LCD.

6. Remove the LCD unit.

Satellite T130D, Satellite Pro T130D, and PORTEGE T130D Maintenance Manua l (960-Q08)