Toshiba PORTEGE T130D, PROT130D manual 4.3 HDD

Chapter 4 Replacement Procedures
4.3 HDD
Removing a HDD-H9.5mm
The following describes the procedure for removing the HDD (See Figure 4-3-1 to 4-3-3).
CAUTION: Take care not to press on the top or bottom of a HDD. Pressure may cause
data loss or damage to the device.
1. Turn the computer upside down.
2. Remove the following screws with a T6 –bit TORX securing a HDD slot cover and
remove a HDD slot cover.
 M2.04.0B FPH(T6) screw x2
3. Remove the following screws securing the HDD assembly.
 M2.03.0B FLAT BIND screw x2
4. Disconnect the HDD assembly from the connector on the system board.
MAIN HDD
Satellite T130D, Satellite Pro T130D , and PORTEGE T130D Maintenance Manual (960-Q08)