Chapter 2 Troubleshooting Procedures
2.14 Memory Troubleshooting
Memory troubleshooting can following below procedures as instructed.
Procedure 1: Diagnostic Test Program Execution Check
Procedure 2: Connect Check and Replacement Check
Procedure 1 Diagnostic Test Program Execution Check
Execute Memory test in the Memory test p rogram. Refer to Chapter 3, Tests and Diagnostics
for more information on how to perform the test program.
If any error is detected by the test, go to Procedure 2.
Procedure 2 Connect Check and Replacement Check
Memory function abnormal always accompany NB run abnormal, the RAM may be not insert
correctly or slot is defective or RAM and system board may be faulty.
Check 1 Make sure RAM is correctly and firmly inserted to the slots. If the problem still
occurs, perform Check 2.
Check 2 RAM may be faulty. Replace it with a new one. If the problem still occurs,
perform Check 3.
Check 3 The slot and MB may be faulty. Replace it with a new one following the
instruction in Chapter 4.
Satellite T130D and Pro T130D and PORTEGE T130DMaintenance Manual (960-Q08)