Toshiba PSC08U-02D01D user manual Internal display panel, Hard disk drive, ProblemProcedure

Troubleshooting

Internal display panel

Apparent computer's display panel problems may be related to the computer's setup and configuration - please refer to Chapter 7, HW Setup, for further information.

Problem	Procedure
No display	Press the FN + F5 hot keys to adjust the display
	priority, and to make sure it is not set for output to
	an external monitor.
Markings appear on the	These marks may have come from contact with
computer's display	the keyboard and Touch Pad while the display
panel.	panel has been closed. You should try to remove
	the marks by gently wiping the display panel with
	a clean dry cloth or, if this fails, with a good
	quality LCD screen cleaner. In this latter instance
	you should always follow the instructions with the
	screen cleaner and always ensure you let the
	display panel dry properly before closing it.
Problems above remain	You should initially refer to the documentation
unresolved or other	supplied with you software to determine if it is
problems occur	this that is causing the problems. Alternatively
	you may wish to run the TOSHIBA PC
	Diagnostic Tool to check the general operation
	of the computer.
	If you are still unable to resolve the problem,
	contact your reseller, dealer or service provider.

Hard disk drive

ProblemProcedure

Computer does not boot Check to see whether that is a CD-ROM/DVD-

from hard disk drive ROM in the optical disc drive - if so remove it and try to start the computer again.

If this has no effect, check the Boot Priority Options setting within the TOSHIBA HW Setup utility - please refer to the Boot Setting section in Chapter 7, HW Setup for further information.

Please refer to your operating system documentation in order to determine whether there is a problem with any of the operating system files or settings.

User’s Manual 8-8