Toshiba PSC08U-02D01D user manual Removing a memory module, 7 Removing the memory module

Hardware, Utilities and Options

Removing a memory module

To remove the memory module, follow the steps as detailed below:

1.Shut down the computer - make sure the Power indicator is off (refer to the Turning off the power section in Chapter 1, Getting Started if required).

2.Remove the AC adaptor and all cables and peripherals connected to the computer.

3.Close the display panel.

4.Turn the computer upside down and remove the battery pack (refer to Replacing the battery pack section in Chapter 6, Power and Power-Up Modes, if required).

5.Loosen the screw securing the memory module cover in place - please note that the screw is attached to the cover in order to prevent them from being lost.

6.Slide your fingernail or a thin object under the cover and lift it off.

7.Push the latches away from the module in order to release it - a spring will force one end of the module up at an angle.

8.Grasp the module by its edges and remove it from the computer.

■If you use the computer for a long time, the memory modules and the circuits locating close to the memory modules will become hot. In this case, let them cool to room temperature before you replace them. Or you will get burnt if you touch any of them.

■Do not touch the connectors on the memory module or on the computer. Debris on the connectors may cause memory access problems.

1

1. Latches

Figure 3-7 Removing the memory module

9. Seat the memory module cover in place and secure it with the screw.

Take care to ensure that the memory module cover is firmly closed.

User’s Manual 3-19