Toshiba SD-P120DTKE owner manual Make, Following setting

Connecting to audio equipment (Continued)

CAUTION

•When you are connecting (via the BITSTREAM/PCM jack) an AV decoder that does not have Dolby Digital, Digital Theater Systems (DTS) or MPEG2 decoding function, be sure to set “Digital Out” to “PCM” from the on-screen displays 74 . Otherwise, high volume sound may damage your hearing as well as the speakers.

•When playing DTS-encoded discs (audio CDs), excessive noise may be output from the analog audio output jacks. To avoid possible damage to the audio system, you should take proper precautions when the analog audio output jacks of the player are connected to an amplifi cation system. To enjoy DTS Digital Surround® playback, an external 5.1 channel DTS Digital Surround® decoder system must be connected to the BITSTREAM/ PCM jack of the player.

	Note
Connections	• DO NOT connect the BITSTREAM/PCM jack of the player to
	the AC-3 RF input of a Dolby Digital Receiver. This input on
	your A/V Receiver is reserved for Laserdisc use only and is
	incompatible with the BITSTREAM/PCM jack of the player.

82

Connecting to an audio system equipped

with analog audio inputs

To AV OUT

Signal fl ow

Audio/video cable (supplied)

	To analog audio inputs
	Red (Right) AUDIO IN	Audio system
	R
	L
	White (Left)
	Yellow (Video)
	No need to connect.
Make the	Setting	Select:	Page
following setting.	“Digital Out”	“Analog 2ch”	74

SD-P120DTKE_ENG_69-92.indd 82

2008/01/17 19:15:10