Channel scanning
■Automatic channel scan
If any menu screen doesn’t show up at the fi rst use of this unit (see “Initial setup”), you can search channels by automatic channel scan. Also, you can add new channels to the channel list.
1 Press SET UP to display the main menu.
2 Press 
/ 
to select “Channel Search” then press
ENTER.
3Press 
/ 
to select “Auto Scan” then press
ENTER.
The channel scan will start.
4Select “Channel No” using 
/ 
and enter the desired channel, then press ENTER.
Scanning will start.
To cancel the search, press EXIT while pressing
SHIFT.
■To reset to the factory default setting
1Press SET UP to display the main menu.
2Select “System Setting” using 
/ 
, then press
ENTER.
3Press 
/ 
to select “First Time Installation” then press ENTER.
The confi rm window appears.
TV viewing
■Manual channel scan
This scan can search channels by specifying frequency.
1 Press SET UP to display the main menu.
2 Press 
/ 
to select “Channel Search” then press
ENTER.
3 Press 
/ 
to select “Manual Scan”.
SD-P120DTKE_ENG_01-68.indd 39
4Press 
/ 
to select “Confirm” then press ENTER.
To cancel the default setting, select “Exit” on confi rmation window, then press ENTER.
When the default setting is complete, the Language setting menu appears in the display.
39
2008/01/17 19:14:26
