Toshiba SD-P120DTKE owner manual Before calling service personnel, Symptom Cause Correction

Before calling service personnel

Check the following guide for the possible cause of a problem before contacting service.

Symptom	Cause	Correction
No power.	• The AC adapter or power plug is disconnected.	• Connect the AC adapter or power plug securely.
	• The battery pack has been removed.	• Install the battery pack.
	• Battery empty.	• Re-charge the battery.
The LCD turned off by itself.	• The automatic LCD off function turned the LCD off.	• Turn on the player again.
No TV channels.	• The aerial is not connected.	• Connect the aerial properly.
No TV channels after	• Channel scan is not fi nished.	• Redo channel scan.
moving.
Picture noises and	• Interference by wave refl ection or poor	• Change the position and direction of the aerial.
distortion.	aerial connection.
Dots on picture.	• Reception is disturbed by vibration.	• Move the aerial away from the cause of the interference.
Stripes on picture.	• Interference by other electric	• Move the aerial away from the cause of the interference.
	apparatuses.
No picture on the LCD monitor.	• The AV OUT jack is connected.	• When you use the LCD of the player, unplug the AV OUT jack.
No picture. (Other than	• The AV OUT jack is not connected to	• Confi rm the connection, and select the appropriate video input mode
built-in LCD monitor)	the TV monitor.	on the TV so the picture from the player appears on the TV screen.
No picture or Sound	• The aerial connection is improperly	• Connect the aerial properly.
(When using the TV tuner.)	positioned.
	• The channel scanning is not set to	• Set by scanning.
	channels available in your area.
No sound.	• The equipment connected via the	• Select the correct input mode of the audio receiver so you can listen
	audio/video cable is not set to receive	to the sound from the player.
	DVD signal output.
	• The volume is too low.	• Adjust the volume by pressing the volume button.
	• The audio receiver or TV is turned off.	• Turn on the equipment connected with the audio/video cable.
	• The setting of output sound format is incorrect.	• Select the proper audio setting.

Others

85

SD-P120DTKE_ENG_69-92.indd 85

2008/01/17 19:15:11