Preparation of the remote control
Insert the specifi ed battery in the remote control. See page 8 , 9 for safe use of
Preparations | 1 Gently insert a fingernail in groove 1 | |
and pull out the holder in direction 2. | ||
| ||
| Backside | |
| 1 |
2
Take care not to break your fi ngernail.
Operating with the remote control
Point the remote control at the remote sensor at a right angle to the LCD and press the buttons.
Distance: About 3 m (9.9 feet) from
| the front of the remote |
| sensor |
Angle: | About 30° in each |
| direction of the front of the |
Within about 3 m (9.9 feet) | remote sensor |
2 Place a 
side up on the holder.
Keep the holder horizontal so that the battery does not fall through.
|
|
| |
|
| ||
| 6 | ||
| |||
2 |
| ||
# |
|
|
|
Do not expose the remote sensor of the player to a strong light source such as direct sunlight or other illumination. If you do so, you may not be able to operate
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
3 Insert the holder into the remote control.
The remote control battery contains Perchlorate Material - special handling may apply.
26
the player via the remote control.
•Aim the remote control at the remote sensor of the player.
•Do not drop or give the remote control a shock.
•Do not leave the remote control near an extremely hot or humid place.
•Do not spill water or put anything wet on the remote control.
•Do not disassemble the remote control.
•If the remote control does not function correctly or if the operating range becomes reduced, replace the battery with new one.
•Inserting a battery other than the specifi ed one or an object may damage the remote control.
2008/01/17 19:14:23
