Connections (Continued)
Radio Antenna Connections
Connect the supplied FM/AM antennas for radio listen- ing.
1.Connect the AM loop antenna to the AM antenna connectors.
2.Connect the FM wire antenna to the FM antenna connectors.
Notes
To prevent noise pickup, keep the AM loop antenna away from the DVD/VCR Receiver and other compo- nents.
Be sure to fully extend the FM wire antenna.
After connecting the FM wire antenna, keep it as hori- zontal as possible.
AM loop antenna (supplied)
Rear of DVD/VCR Receiver
Accessory Audio/Video (A/V) Connections to DVD/VCR Receiver
Connect the VCR IN LINE1 or LINE in 2 jacks on the DVD/VCR Receiver to the audio/video out jacks on your accessory component, using optional audio/video cables.
Digital Device Connections
Connect the DIGITAL AUDIO IN (OPTICAL) jacks on the DVD/VCR Receiver to the digital audio out (optical) jacks on your digital device (Game device, Digital Set Top Box, etc.), using optional optical audio cable.
To select source of DVD/VCR Receiver to OPTICAL IN, press AUX on the remote control.
Notes
If the audio format of the digital output does not match the capabilities of your DVD/VCR Receiver, the DVD/VCR Receiver will produce a strong, distorted sound or no sound at all.
The Optical input function is available only when the other unit’s Sampling Frequency is 32 - 48kHz.
Game Device |
| Digital Set Top Box | |
|
|
|
|
|
|
|
|
OR
Rear of DVD/VCR Receiver
AUDIO
OUTPUT
R
L
VIDEO
OUTPUT
OR
Rear of DVD/VCR Receiver | Front of DVD/VCR Receiver |
14